Skip to main content
Design_law_steals_the_show_05.jpg
IP 博客 / Design law steals the show

Design law steals the show

Among the lineup of Intellectual Property (IP) rights, designs are perhaps the most and the least glamorous, often not receiving the spotlight their aesthetic fixation and brand value would imply. A lack of awareness and alignment has contributed to this oversight in favor of the longer-lasting copyright, ubiquitous trademark and more familiar patent.

Part of the issue stems from the fact that design protection varies enormously depending on location. Some countries, most prominently the United States, provide design patents following a rigorous examination, while the European Union and other jurisdictions have no substantive procedure and grant rights quickly and cheaply. The duration of protection also differs around the world, as does the subject matter that is eligible for design protection. To further complicate matters, many jurisdictions provide protection for unregistered as well as registered designs.

Discover more about our Design Protection services

Despite these challenges, demand for design rights continues to grow. According to figures published by the World Intellectual Property Organization (WIPO), the number of international applications for designs under the Hague System reached a record number in 2023, increasing by 1% compared to 2022. By contrast, the number of patent applications made through the Patent Cooperation Treaty (PCT) and trademark applications using the Madrid System both fell in 2023.

Two major developments in 2024 are set to give a further boost to design rights and likely make them even more attractive for designers and other creative businesses. November's diplomatic conference in Saudi Arabia will see representatives meeting to conclude and adopt a Design Law Treaty after many years of meticulous discussion. Concurrently, the EU is soon to reform design law protection for the first time since the present system was created in 2002.

The Design Law Treaty

The proposed Design Law Treaty does not include substantive harmonization. Instead, like the Patent Law Treaty and the Singapore Treaty on the Law of Trademarks, it aims to facilitate international design filings by bringing administrative procedures into closer accord.

csm_Design_law_steals_the_show_06_ed82e32e04

Whether referred to as "designs" or "design patents," their function remains the same: to protect those purely aesthetic or ornamental aspects of a product. These may be two-dimensional, as with colors and patterns, or three-dimensional, as with shape.

According to the WIPO, this will make acquiring exclusive rights for designs "easier, faster and cheaper" both in filers' home markets and overseas. Some of those who stand to benefit most from this arrangement are small and medium-sized enterprises (SMEs) based in low- and medium-income countries, for whom design protection in foreign markets will become more accessible. According to the draft articles and regulations, which are still subject to discussion, the Treaty will cover issues such as filing dates, grace periods and disclosure, the amendment / division of applications including more than one design, renewals, priority and licensing.

If, as anticipated, the Design Law Treaty is agreed at the diplomatic conference in November, it will need to be acceded to / ratified by the required number of states or intergovernmental organizations for it to enter into force.

Revamping EU design law

The design reform package in Europe comprises a new EU design regulation and EU design directive. The final texts of both instruments were provisionally agreed in December 2023 and formally adopted by the European Parliament on March 14, 2024. They are expected to be endorsed by the Council and published later this year.

The legislation brings EU design law up to date in a number of respects. For one, the registered Community design (RCD) will be renamed the European Union design (EU design). Additionally, there will be changes to the definition of a design to accommodate non-physical (digital) goods and adjustments to fees to reflect the region-wide scope of protection and preserve the financial viability of national applications. Furthermore, a new symbol consisting of a D in a circle will be introduced to indicate a registration, equivalent to the R mark for registered trademarks.

Most notably, however, the revised directive includes a repair clause in Article 19. This aims to harmonize the law on spare parts in the EU for the first time. It provides that protection "shall not be conferred on a registered design which constitutes a component part of a complex product upon whose appearance the design of the component part is dependent, and which is used […] for the sole purpose of the repair of that complex product so as to restore its original appearance."

csm_Design_law_steals_the_show_07_dafdcc5cb2

The aspects protected by industrial design rights are not mere window dressing. They often enhance desirability and communicate a quality proposition to consumers, by extension, representing a source of added brand value to owners.

To benefit from this exemption, manufacturers or sellers of parts must allow consumers to make informed purchasing decisions by specifying the commercial origin and identity of the part manufacturer. However, third-party suppliers are not required "to guarantee that the component parts they make or sell are ultimately used by end users for the sole purpose of repair so as to restore the original appearance of the complex product."

The repair clause has been the subject of many years of debate, with strong views coming from the automotive industry. The solution reached aims to liberalize the spare parts market, allowing consumers greater opportunity to repair high-value goods. Given the sensitivity in this area, the legislation provides for an eight-year transition period.

IP designs the future

Whether a substantive examination is involved or not, designs can be very powerful IP rights that defend investments for products as diverse as furniture, buildings, fashion, electronic gadgets and even graphical user interfaces (GUIs). Given their ability to mold customer perception and contribute to a brand image, they can be the difference between a company that leads its market and a rival playing catch-up. Designs are especially valuable for new logos and packaging in that they can offer brand owners a period of coverage (typically 15 or 25 years) during which to acquire distinctiveness for trademark registration. Case law on designs is also growing, particularly in Europe, providing guidance and clarity for applicants and third parties.

csm_Design_law_steals_the_show_04_bdad4d70a7

Adding a circled D symbol to their work might not be an attractive option for some, particularly in the case of two-dimensional designs, where a suitable location may be hard to find. Luckily, this action will not be mandatory for registered EU designs.

As an example, the power of designs is well illustrated by the recent judgment of the Court of Appeal for England and Wales in Marks & Spencer PLC vs. Aldi Stores Limited. In this case, supermarket Marks & Spencer successfully enforced its registered designs relating to light-up gin bottles against rival Aldi. The decision to file four designs for the seasonal product had the outcome of effectively cutting out a competitor – and likely sending a warning to copycats in the market.

If there were any further doubt that the time for designs has come, consider that the United States Patent and Trademark Office (USPTO) introduced a new design patent practitioner bar on January 2, 2024. This allows practitioners to be admitted before the Office in relation to ornamental designs without the engineering and scientific qualifications required for the standard (combined utility, plant and design) patent bar.

With all these developments, 2024 has the potential to be the year design law truly takes to the red carpet.

Filed in

Previous article
csm_Building_brand_identity_with_trademarks_and_industrial_designs_06_21278c3166
Building brand identity with trademarks and industrial designs

Learn the difference between trademarks and industrial design — and why each has a crucial role in building brand identity.

Next article
csm_Taking_a_bite_out_of_IP_law_exploring_two_EUIPO_snack_cases_03_44e4f4b40e
Taking a bite out of IP law: exploring two EUIPO snack cases

Learn about recent legal cases concerning trademarks and registered Community designs.